PASSIVE HOUSE MODELLING

Passive House (Passivhaus) is the world’s most rigorous building-performance standard. Where a NatHERS rating models predicted performance, Passive House sets measured, verified targets for airtightness, insulation, thermal bridging, ventilation and comfort — and holds the finished building to them.

The result is a home that stays comfortable all year on a fraction of the energy.

Efficient Habitat provides independent Passive House modelling and design consulting for architects, builders and developers across Australia. We model your project in PHPP (the Passive House Planning Package), identify what it takes to reach your performance or certification target, and help your team get there cost-effectively.

Why Passive House, when 7 stars is the minimum?

Because a 7-star home is a baseline, not best practice — and in Australia, even the baseline isn’t guaranteed. Unlike structural or fire safety, energy-efficiency measures such as insulation and airtightness aren’t formally inspected. So what’s drawn on paper often isn’t what ends up built: insulation gets compressed or left out, windows aren’t sealed, thermal details are skipped. The rating assumes everything is installed perfectly; reality frequently differs. (Read more: why energy efficiency compliance is so often overlooked.)

Passive House closes that gap. Airtightness and insulation are measured and verified — for example with blower door testing — so the finished building genuinely performs. For clients who want certainty of comfort, health and running costs rather than a compliance certificate and crossed fingers, that verification is the whole point.

The five Passive House fundamentals

  • A highly insulated building envelope
  • A continuous, air-tight layer
  • Elimination of thermal bridges
  • Heat recovery ventilation (MVHR) delivering constant fresh, filtered air
  • High-performance glazing

Together these deliver stable indoor temperatures, excellent air quality, freedom from condensation and mould, and very low heating and cooling demand.

What our modelling gives you

  • A PHPP energy-balance model of your project
  • Clear guidance on insulation, glazing, ventilation and detailing to hit your targets
  • A thermal-bridge and airtightness strategy
  • A pathway to certification (Classic, Plus or Premium; EnerPHit for retrofits)
  • Value engineering so you reach the standard without over-spending

Performance you can feel — and that protects health

The same gaps that hurt energy performance also cause moisture, mould and poor indoor air quality — problems that come back to the designer, developer or builder down the track. Passive House’s verified airtightness and heat-recovery ventilation produce a genuinely healthy, comfortable internal environment, which is increasingly what discerning clients are paying for. (Read more: the health benefits of Passive House.)

Why Efficient Habitat

  • Genuine Passive House expertise — depth that very few assessors in the market offer.
  • Premium, but efficiency-conscious — we keep the cost premium sensible through early, smart modelling.
  • Comfortable with complex and large-scale projects, Australia-wide. Need code compliance too? We also prepare NatHERS star ratings and BASIX certificates.

Frequently asked questions

A 7-star home meets the code minimum based on modelled assumptions. A Passive House targets far higher, verified performance — typically using only one-third to one-half of the heating and cooling energy of a 7-star home — with airtightness and insulation measured and confirmed on site.

No. Many clients model to Passive House principles to capture most of the comfort and efficiency benefits without formal certification. We can guide you down either path, depending on your goals and budget.

Yes. The standard applies across heating- and cooling-dominated climates. Our PHPP modelling tailors the insulation, glazing and ventilation strategy to your specific climate zone.

Yes — through EnerPHit, the Passive House standard for retrofits. We model the most effective upgrades for an existing structure.

It is a premium standard, but early modelling and smart value engineering keep the cost premium down, and the payoff is guaranteed comfort, healthier indoor air, and very low running costs for the life of the building.

THINKING ABOUT PASSIVE
HOUSE? LET'S MODEL IT.

Tell us about your project and we’ll show you what it takes to reach the performance you’re after — and request a tailored quote.

energy efficiency